Crane rental in Western Oklahoma, without the phone tag
Tell us what you need lifted and where. We match your job with a local crane operator working Elk City, Clinton, Weatherford, Sayre, Cheyenne, Cordell and the oilfield in between, and they get back to you by text or email.
Get a crane quote
No phone calls needed. Send the details and we will reply by text or email.
Crane service for the oilfield, the farm and the job site
Western Oklahoma sits on the Anadarko Basin, and drilling is active across the region. Roger Mills and Custer counties have been among the busiest counties in the state for drilling rigs in 2026, according to weekly Baker Hughes county rig counts. That means rig moves, tank batteries, separators and pumping units that need setting. The same towns along I-40 and Historic Route 66 also need cranes for steel buildings, rooftop units, grain bins, wind farm work and the occasional backyard lift.
Oilfield crane service
Setting tanks, separators, heater-treaters and other production equipment, handling pipe and wellsite equipment, rig-up support and pumping unit work across the Anadarko Basin.
Commercial & ag construction
Steel building erection, trusses and beams, rooftop HVAC units, grain bins, shop equipment and machinery setting.
Wind, residential & one-off lifts
Wind turbine service support, plus tree removal picks, hot tubs, pool equipment, storage containers and other lifts over a house or fence.
How it works
- Send the job details. Use the quote form: what you're lifting, how heavy, how high or far, where, and when. No phone call required.
- We match you with a local operator. Your request goes to a vetted crane operator who works the Western Oklahoma area and has equipment suited to the job.
- The operator quotes and confirms. They'll follow up by text or email to confirm the crane size, rigging, site access and price. You decide whether to book.
- The lift gets done. The crane company performs the work under its own insurance, operators and safety program.
You only talk to the crane company if you want to book. No obligation.
Where we take crane requests
Elk City is the center of our service area, with Clinton the second hub. Requests from anywhere in Beckham, Custer, Roger Mills and Washita counties are welcome, and we'll try to match jobs in neighboring areas like Kiowa County (Hobart) too.
Crane rental FAQ
What size crane do I need?
It depends on more than the weight. Crane capacity drops quickly as the load moves farther from the crane, so the operator sizes the crane using the load weight plus rigging, the radius (horizontal distance from the crane to where the load is picked and set), and the height needed. A crane rated at 30 tons can lift far less than 30 tons at a long reach.
As a rough guide: boom trucks and smaller hydraulic cranes are commonly used for lighter, close-in picks such as rooftop HVAC units, hot tubs, trusses and small tanks; larger hydraulic truck or all-terrain cranes are used for heavier tanks, separators, steel and long reaches; wind turbine components need large specialty cranes. The operator will confirm the right machine from their load charts.
What information should I have ready?
- Weight of the heaviest piece (nameplate, spec sheet or bill of lading is best) and its dimensions
- Where it is now and where it needs to go, and the closest spot a crane can set up
- Lift height, and how far from the crane the load must be set
- Ground and access: lease road, gravel pad, soft or muddy ground, gates, slopes
- Overhead power lines, buildings or other obstructions
- Date and time window, plus an on-site contact
- Whether you need rigging, a rigger/signal person, or a truck to haul the load
Photos of the load and the site help a lot. Mention them in the details box and the operator can ask for them when they follow up.
What's the difference between an operated and a bare rental?
An operated (operated & maintained) rental includes the crane plus the crane company's operator, and often a rigger or oiler, usually billed by the hour with a minimum. That's what most one-off jobs use. A bare rental is the machine only: you supply a qualified operator and take on more responsibility for the equipment and the lift. For construction work, OSHA's crane rule (29 CFR 1926 Subpart CC) requires operators to be trained and certified or qualified, so bare rentals are generally a fit only for companies with their own certified operators.
How much notice do you need?
As much as you can give. Availability depends on the operator's schedule and the size of crane needed. Smaller cranes can sometimes be scheduled on short notice; large cranes, multi-crane picks, and jobs that need a lift plan or permits take longer to line up. Put your real deadline in the form and the operator will tell you what's possible.
How much does a crane rental cost?
We don't publish prices because they vary with crane size, travel distance to your site, hours on site, rigging, and any permits or escorts. Crane companies commonly charge an hourly rate with a minimum, plus travel or mobilization. The operator's quote will spell it out before you commit. Requesting a quote is free.
What about power lines?
Tell us about any overhead lines near the work area. OSHA's crane rule requires planning and minimum clearances when a crane could get close to power lines (generally at least 20 feet for lines up to 350 kV, more for higher voltages), and the operator may need the utility to de-energize or mark lines first.
Are you a crane company?
No. Western OK Crane is a request-matching service. We don't own cranes or employ operators. We pass your request to an independent local crane company that quotes, schedules and performs the work under its own insurance and safety program. Ask the operator for their certificate of insurance and operator certifications if your site requires them.
Ready when you are
Send the job details and a local operator will follow up by text or email.
Request a crane quote